External Thermal Insulation System
Tile Installation System
Sealing Systems
Repair Construction
Plasters – Renders
Decorative cementitious mortar system
BIOPANOPLY ACRYLIC
Acrylic pasty fiber-reinforced adhesive
BIOPANOPLY ACRYL is a ready-to-use, pasty, fiber-reinforced acrylic adhesive. It is used for smoothing the surface of the thermal insulation boards after their installation and for the installation of the fiberglass mesh sheet, before the application of the top coat plasters (cementitious or organic pasty plasters). It ensures high resistance to compression and bending, as well as to changes in temperature and humidity. Homogeneous, ready-to-mix, industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.
Download the TDS - Technical Data Sheet here
Download the DOP - Declaration of Performance here
Mixture of acrylic emulsion of high elasticity and crushed marble of strictly selected granulometry and quality, enriched with special improving additives.
• The surface of the insulation board must be clean and dry. • The product shall be thoroughly mixed with a low-speed electric mixer. • The adhesive is applied to the outer side of the insulation board with a serrated putty knife (8-10 mm) and while it is still damp, the fiberglass mesh sheet is placed on the surface and embedded using a smooth putty knife so that it is finally completely surrounded by the adhesive. • After at least 2-3 days, the application of the final layer of plaster follows, without the need to use a primer. • With the application of the desired finishing plasters (white or colored), the thermal insulation system is completed. • Extreme climatic conditions (such as strong wind, rain, dust, direct sunlight, etc.) should be avoided during the application of the adhesive and for a few hours afterwards. • The application temperature should be between +5 °C and +35 °C.
- In 25kg containers on pallets.
- In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight for 12 months from the date of production.
Approximately 3.5-4.0 kg/m2, depending on the type of substrate.
It is classified according to the harmonized European standard EN 15824:2017 as: organic water-based mortar for interior and exterior use on walls, ceilings, columns and partitions.
| Granule size | 0.0-0.7 mm |
| Density | 1.7-1.8 kg/l |
Although the specifications and guidelines set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative and require verification after many applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product.
