• Aqueous dispersion of a mixture of acrylic and silicone polymers on a nanomolecular scale.
BOARD PRIMER is applied as a primer to plasterboards or cement boards, old masonry, as well as to surfaces of high absorbency (aerated concrete etc.) or superficially loose surfaces. It provides hydrophobicity, deep penetration into the substrate and at the same time it increases its stability. In this way it creates the ideal conditions for the application on such surfaces of finishing plasters, adhesive tiles, paints, etc. It is suitable for all cementitious decorative, colored or white plasters, as well as for spatulated surfaces. Homogeneous, ready-to-use industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.
• Aqueous dispersion of a mixture of acrylic and silicone polymers on a nanomolecular scale.
• The substrate must be clean, dry and firm. • BOARD PRIMER should be well stirred before use and can be applied as is. • It should be mixed with clean water in a ratio of 1:1 to 1:4 depending on the absorbency of the substrate or the degree of the surface corrosion. • The resulting mixture is easily applied with a roller, a brush or a spraying device in one or two coats. • The primed surface is ready after BOARD PRIMER has completely dried (depending on weather conditions and substrate type). • The temperature during the application of the product should be between +5 oC and +35 oC.
• In containers of 18 kg, 5 kg in pallets. • In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight, for 12 months from the date of production.
Approximately 100 gr/m2, depending on dilution and substrate type.
Color | White |
Viscosity | 100 mPa.s |
Density | 1.0 kg/l |
pH | pH 8-9 |
No account yet?
Create an Account