DECOPLASTER GRAFIATO
Water-repellent top coat plaster
GRANULOMETRIES: FINE/STANDARD
DECOPLASTER GRAFIATO is a decorative top coat plaster which is mainly used for exterior, but also for interior applications. It complies with: EAD 040083-00-0404, ETA 20/0778 – 20/0699, in the context of MARMODOM’s external thermal insulation systems BIOPANOPLY (EPS / WOOL), as a final decorative plaster on the external render of the thermal insulation boards (“adhesive/mesh”). It is applied on top of the main layer plaster or the one layer plaster, and after its application, no painting of the plastered surfaces is required. Homogeneous, ready-to-mix, industrial product of consistently high quality. It has excellent mechanical characteristics, excellent adhesion and resistance to humidity and frost, and increased resistance to cracking. It ensures good workability, increased application speed, it is economical and provides excellent results.
- 1Mixture of high specifications white cement and crushed marble of strictly selected granulometry and quality, enriched with polymers and other special improving additives.
- It is classified according to standard EN 998-1: 2016: as CR, CS II, Wc2 .
- Granule size: standard <2.4 mm, fine <1.3 mm
• The substrate must be clean and firm and it is recommended that it is wetted before application. • The contents of the bag shall be gradually added to clean water (approximately 5.5 l/bag) using an electric mixer at low speed until a homogeneous mixture is obtained. • To prepare colored DECOPLASTER, first dissolve the appropriate MARMOCOLOR pigment in water and then mix the white plaster in the dissolved pigment. • The product is applied over the main layer plaster or the one layer plaster using a stainless steel putty knife. The thickness of the application layer should be approximately 3 mm for the standard plaster and 1.5 mm for the fine plaster. For the purposes of the required decoration, a metal hawk or a putty knife may be used immediately after the application of DECOPLASTER. The smoothing/sanding of the plaster is recommended to be done with a hard plastic or styrofoam float without wetting the plaster. The DÉCOR look is best achieved with small circular movements of the float. The GRAFIATO look is best achieved with long circular movements of the float followed by longitudinal movements in the desired direction. • For best results, the finishing of the surfaces should be done immediately after plastering without any interruptions in between. Ready-mixed plasters should not be applied directly onto plaster walls or plaster mortars, except under the responsibility of the user and after an acrylic primer has been applied. The overdosage of water reduces the expected quality of the products. Ready-to-mix plasters contain cement which is classified as an irritant. Consult the safety instructions and precautions listed in the Material Safety Data Sheet of the product. • The application of the plaster should be carried out at temperatures between +5 oC and 35 oC.
• In bags of 25 kg, on pallets. • In a dry place where frost does not form, for 12 months from the date of production, in unopened bags.
.
DECOPLASTER GRAFIATO FINE | ~3.0 – 4.0 kg/m² |
DECOPLASTER GRAFIATO STANDARD | ~4.0 – 5.0 kg/m² |
Depending on the type of substrate and the required finish.
Specifications: EN 998-1, EAD 040083-00-0404
Granule size | |
DECOPLASTER GRAFIATO FINE | < 1.5 mm |
DECOPLASTER GRAFIATO STANDARD | < 2.0 mm |
Vapor permeability | sd<0.14m (V1) |
Adhesion | 1.55 N/mm² |
Apparent dry mortar density | 1600 – 1700 kg/m3 |
Consumption | 3.0 – 5.0 kg/m2 |
Capillary water absorption | Cm<0.1 kg/m2. min0.5 |
Vapor permeability coefficient | μ<12 |
Although the specifications and guidelines set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative results and require verification after many applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product.