Click to enlarge

EASYROLL

Flexible, waterproof, colored, acrylic plaster applied by a roller

EASYROLL is a colored, ready-to-use acrylic plaster in paste form for exterior and interior applications. It is used as a top coat plaster. It has an advantage over similar products because it is applied with a roller, like common paint. The reduced consumption and speed of application are also key advantages, as well as the fact that it does not require finishing. It is applied over substrates such as base coat plasters, concrete, plasterboards, cement boards, etc. It ensures full water repellency, covers existing cracks and eliminates the risk of new cracks. No painting of the plastered surfaces is required. It is ideal for final coating on external thermal insulation. It complies with: EAD 040083-00-0404, ETA 20/0778 – 20/0699, for the external thermal insulation systems BIOPANOPLY EPS and WOOL of MARMODOM. Homogeneous, ready-to-use, industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.

Composition & Features

Mixture of acrylic emulsion of high elasticity and crushed marble of strictly selected granulometry and quality, enriched with special improving additives.

Application
  • The substrate must be firm, dry and clean of any kind of residues (plasters, powders, paints, oils, etc.).
  • The product is stirred very well and applied in two coats using a roller or a paint brush.
  • The second coat is applied after the first coat is completely dry.
  • The application temperature should be between +5 oC and +35 oC.
  • For best results, before applying the pasty plasters, the substrate should be prepared with BIOPRIMER or BIOPRIMER PRO FINE primer in the same shade or color combination.
Packaging & Storage

• In containers of 25 kg and 5 kg on pallets. • In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight for 12 months from the date of production.

Consumption

Approximately 1.5 kg/m2, for two layers, depending on the type of substrate.

Technical Specifications

Specifications EN: EN 15824:2017 / EAD 040083-00-0404

Granule size0.0-0.7 mm
Density1.6-1.7 kg/l
Consumption~1.5 kgm2 (total for coats)
Adhesion (EN 1542:2002)>3 MPa
Thermal conductivity λ10, dry (EN 1745:2012)0,62 W/m.K
Water absorption (EN 1062-3:2008)w<0.1 kg/m2. h0.5 (W3)
Capillary water absorption (EN 1015-18:2004)Cm<0.1 kg/m2. min0.5
Vapor permeability (EN ISO 7783:2011)0.14<sd&lt.1,4m (V2)
Fire reaction (EN 13501-1:2007)Category C

Although the specifications and guidance set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative and require verification after many applications.  Users to whom this product is addressed should verify its suitability for the intended application.  The end user is responsible for any result of the use of the product.