External Thermal Insulation System
Tile Installation System
Sealing Systems
Repair Construction
Plasters – Renders
Decorative cementitious mortar system
SPATULA 100
Resinous skim coat putty
SPATULA 100 is used for sanding and smoothing wall surfaces, for interior and exterior applications. It is intended for use over conventional and ready-mixed plasters or also for the reconstruction or repair of old plastered surfaces. It is also recommended for small-scale repairs and treatment of small cracks in plastered surfaces. The finished surfaces can be easily painted. Homogeneous, ready-to-mix, industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.
• Mixture of high specifications white cement, crushed marble of strictly selected granulometry and quality, enriched with polymers and other special improving additives.
- Classified according to the EN 998-1:2016 standard as a plaster: GP, CS ΙV, Wc2
- Granule size <0.1 mm.
• The substrate must be clean and firm and it is recommended that it is wetted before application. • On newly plastered surfaces, application of SP 100 is recommended after a minimum of seven days (the waiting period varies depending on weather conditions). • The contents of the bag are gradually added to clean water (approximately 6.0-6.4 l/bag) using an electric mixer at low speed until a homogeneous mixture is obtained. • The mixture is applied to a thickness of 1-2 mm, depending on the surface, in one or two coats, using a putty knife of a hawk. The second coat is applied after the first coat has fully set. No further surface treatment is required. If desired, the surface can be sanded the next day using a sander. • For excellent results, economy and increased speed of application, apply the first coat with a metal hawk and the second coat with a putty knife. • During the application stage, it is recommended that the temperature is between +5 oC and +35 oC.
- For better results especially on old plastered surfaces, before applying SPATULA 100, a diluted mixture of BOARDPRIMER primer and water (in a ratio of 1:3 to 1:4) should be applied to the substrate.
- SPATULA 100 contains cement which is classified as an irritant. Consult the safety instructions and precautions listed in the Material Safety Data Sheet of the product.
• In bags of 20 kg, on pallets. • In a dry place where frost does not form, for 12 months from the date of production, in unopened bags.
Approximately 1.5 kg/m2 for a thickness of 1 mm, depending on the substrate and the required finish.
Specifications: EN 998-1:2016
Granule size 0.0-0.1mm Reaction to fire Class A2 – s1, d0 Adhesion 1.5 N/mm² Density of damp mortar 1600 ± 100 g/l Consumption 1.5 kg/m2 Capillary water absorption <0.15 kg/m2. min0.5 Resistance to bending 2.8 ± 0.2 N/mm22 Although the specifications and guidelines set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative results and require verification after many applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product.
