External Thermal Insulation System
Tile Installation System
Sealing Systems
Repair Construction
Plasters – Renders
Decorative cementitious mortar system
SUPER BOND PRIMER
High-strength primer (red)
SUPER BOND PRIMER is used as a primer to improve adhesion. Suitable for interior and exterior surfaces. It is ideal as a primer for reconstruction of surfaces with existing tile layers, as well as for any type of substrate to which cementitious smoothing systems will be applied (tile adhesives, decorative cementitious mortar, self-leveling floors, etc.) and high adhesion strength is required. Homogeneous, ready-to-use industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.
• Aqueous solution of polymeric dispersion, enriched with special improving additives
- The substrate must be firm, dry and clean of any kind of residues (plasters, powders, paints, oils, etc.)
- Before application, the contents of the plastic container must be stirred well.
- In the case of absorbent substrates, it is recommended to dilute SUPER BOND PRIMER with clean water in a ratio not exceeding 1:2 (1 part of WATER : 2 parts of SUPER BOND PRIMER).
- It is applied to surfaces with a roller or a brush.
- The coated surface is ready for use after drying for 1-2 hours, depending on weather conditions and type of substrate.
- The application temperature should be between +5 oC and +35 oC.
Although the specifications and instructions set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative results and require verification after several applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product.
• In containers of 20 kg, 5 kg, 1 kg in pallets. • In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight, for 12 months from the date of production.
Approximately 100-150 gr/m2, depending on the type of substrate.
Form Viscous liquid Density 1.05 kg/l Water absorption W<0.1 kg/m2 . h0.5 (W3) Vapor permeability sd<0.14m (V1) pH 8-9 Adhesion to concrete >4.0 MPa
| Form | Viscous liquid |
| Density | 1.05 kg/l |
| Water absorption | W<0.1 kg/m2. h0.5 (W3) |
| Vapor permeability | sd<0.14m (V1) |
| pH | 8-9 |
| Adhesion to concrete | 4.0 MPa |
