HY PEARL PLASTER
Silicone-based, waterproof, water vapor permeable, colored, decorative plaster.
Granulometries of decor: FINE (1.0 mm) / STANDARD (1.3 mm)
Granulometries of grafiato: STANDARD (1.3 mm)
HY PEARL PLASTER is a colored, silicone-based Pearl-Effect technology, vapor permeable and water-resistant plaster in paste form, ready for use on DÉCOR & GRAFIATO facades. Suitable for outdoor and indoor applications. It is used as a top coat on substrates such as base or single coat plasters, concrete, plasterboards, cement boards, etc. It is ideal as a top coat in external thermal insulation systems.
- Excellent workability
- Elastic properties that eliminate the risk of cracking
- It ensures high-strength bonding, high resistance to weather changes and contaminants, and easy cleaning
- Exceptional resistance to impact
- It is vapor permeable and at the same time highly water repellent
- No painting of the coated surfaces is required.
- Ideal as a coating on external thermal insulation.
- Homogeneous ready-to-use, industrial product with consistently high quality.
- It ensures proper workability, increased speed of application, it is cost-effective with excellent results.
.
Mixture of silicone and acrylic emulsion of high elasticity, organic binding materials and crushed marble of strictly selected granulometry and quality, enriched with special improving additives.
- The substrate must be firm, dry and clean of any kind of residues (plasters, powders, paints, oils, etc.).
- The product is stirred very well and applied using a smooth metal putty knife. The thickness of the application layer ranges from 1.0 mm to 1.3 mm and depends on the granulometry of the product and the coarseness of the substrate.
- For excellent results, both the application of the plaster and the finishing of the plastered surfaces must be carried out without intermediate interruptions and without wetting.
- Finishing is carried out with a hard plastic or metal float or polystyrene float.
- The Decor look is best achieved by making small continuous circular movements with the float.
- The Grafiato look is best achieved by making long circular movements with the float and then longitudinal movements in the desired direction.
- The exact application and finishing time depends on the substrate and environmental conditions. Before, during the application and until the hardening of the render, the surfaces should be protected from exposure to climatic or environmental conditions (wind, rain, high temperatures, dust, etc.).
- The application temperature should be between + 5 °C and +35 °C.
- For best results, before applying SILICONE PLASTER, the substrate should be prepared with BIOPRIMER primer.
- In particular in the case of shades, it is important to first apply BIOPRIMER in the same shade as the shade of SILICONE PLASTER
.
- In 25 kg containers on pallets.
- In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight for 12 months from the date of production.
From 1.5 kg/m2 to 2.5 kg/m2, depending on the granulometry, the type of substrate and the required finish.
Granule size: DÉCOR FINE DÉCOR STANDARD GRAFIATO STANDARD | Layer thickness: ~ 1.0 mm ~ 1.5 mm ~ 1.5 mm | Consumption: ~ 1.5 kg/mm ~ 2.2 kg/mm ~ 2.2 kg/mm |
Specifications: EN 15824:2017 (Silicone-based, vapor permeable, waterproof plaster)
Granule size DÉCOR FINE: DÉCOR STANDARD: GRAFIATO FINE: | < 1.0 mm < 1.5 mm < 1.5 mm |
pH | 7.5-9.5 |
Adhesion | ≥ 0.3 MPa |
Density of damp mortar | 1800 ± 100 g/l |
Thermal conductivity λ(10, dry) | 1.11 W/m.K |
Water absorption | W2 |
Vapor permeability | V2 |
VOC | < 40 g/l |
Reaction to fire | Class B-s2-d0 |
Although the specifications and guidelines set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative and require verification after many applications. Users to whom this product is addressed should verify its suitability for the intended application. The end user is responsible for any result of the use of the product