HYDOM METAL CONNECTOR
Nailing connector for fastening thermal insulation boards with a plastic-metal pin
The HYDOM METAL connector is ideal for fastening hard insulation boards, such as polystyrene or rockwool boards, lightweight wood wool boards to concrete, solid and perforated brick, lightweight concrete and aerated concrete. The ETA (European Technical Assessment) certification guarantees safe fastening. It consists of a grey connector with an integrated disc and a plastic-metal pin. With fast nailing and a short anchorage depth, it saves time and costs. The metal part of the pin guarantees resistance to high loads. Thanks to the flat disc, an economical, thin coat of plaster can be applied.
- Installation with a few taps of a hammer.
- The disc is only 2.5 mm thick, allowing the application of economical, thin coats of plaster.
- Resistant to heavy loads thanks to the metal end of the pin.
- The small anchorage depth of 35mm saves drilling time.
- The HYDOM METAL connector has practically no thermal bridge due to the special pin.
- The relief zone of the connector allows the precise positioning of the disc.
Composition & Features
CONNECTOR HYDOM METAL 11 cm |
CONNECTOR HYDOM METAL 13 cm |
HYDOM METAL 15 cm |
CONNECTOR HYDOM METAL 17 cm |
CONNECTOR HYDOM METAL 19 cm |
Application
- Designed for fitted installation.
- Simple, quick installation with a hammer.
- The non-bearing layers, such as adhesive and old plaster, are included in the maximum usable length.
Applications
.
- Fastening of thermal facade boards to concrete and brick
- Fitting face side to polystyrene and rockwool insulation boards
Building materials
- Building materials of class A, B, C, D, E
- Concrete
- Concrete slab
- Solid brick
- Solid calcium silicate brick
- Cement block
- Perforated brick
- Perforated calcium silicate brick
- Light concrete
- Aerated concrete