HY GROUT ULTRA

The joints must be clean of any foreign objects and it is recommended that they are wetted before application. • The grouting on the floor should be done at least 24 hours after the tiles are laid with adhesive, while on the wall the time to start grouting ranges between 8-10 hours. The time indicated is for normal setting adhesives. • The contents of the package (3 kg) are gradually added to clean water (approximately 0.8 l/bag) using an electric mixer at low speed until a homogeneous mixture is obtained. The mixture is allowed to “rest” for 3 minutes and then is stirred again. If the paste remains in the container for more than 15-20 minutes, it should be mixed again. ATTENTION: Adding more water than the recommended significantly reduces the strength of the grout and can lead to discoloration and fading of the color. • Proper fluidity and consistency of the HYGROUT ULTRA (adding the recommended amount of water) contributes to its immediate penetration and effective sealing of joints. • The joints are filled using a rubber putty knife and always in diagonal movements in relation to the tiles. • Any residue on the surface of the tiles should be wiped off with a wet sponge within the next 10-15 minutes. (The time interval depends on the ambient temperature). Then, the surfaced should be wiped with a damp cloth, which gives the desired result. • The final treatment of the surfaces should be carried out after the cement mortar has hardened. • The grouted surfaces must be protected during the first 12 hours from extreme temperature changes, frost, dust, wind, etc. • During the application stage, it is recommended that the temperature is between +5 oC and +35 oC.