Click to enlarge

SILICONE PLASTER

Silicone, water vapor permeable, colored, decorative plaster

GRANULOMETRIES OF DECOR: FINE (1.0 mm) / STANDARD (1.3 mm) GRANULOMETRIES OF GRAFIATO: STANDARD (1.3 mm)

SILICONE PLASTER is a colored, silicone, water vapor permeable and waterproof plaster in the form of a paste, ready-to-use on DÉCOR & GRAFIATO facades. Suitable for outdoor and indoor applications.  It is used as a top coat on substrates such as base or single coat plasters, concrete, plasterboards, cement boards, etc. It is ideal as a top coat for external thermal insulation systems. It complies with: EAD 040083-00-0404, ETA 20/0778 and ETA 20/0699, for MARMODOM’s BIOPANOPLY EPS and WOOL external thermal insulation systems as a decorative finishing plaster. It ensures full water repellency and at the same time high water vapor permeability and breathability of the structural elements, thus reducing to a minimum the possibility of mold growth. It eliminates the risk of cracking. No painting of the plastered surfaces is required. Homogeneous, ready-to-use, industrial product of consistently high quality. It ensures good workability, increased application speed, it is economical and provides excellent results.

Σύσταση & Χαρακτηριστικά

Mixture of high elasticity silicone emulsion, organic binding materials and crushed marble of strictly selected granulometry and quality, enriched with special improving additives.

Εφαρμογή

• The substrate must be firm, dry and clean from any kind of residues (plasters, powders, paints, oils, etc.) • The product is stirred very well and applied using a smooth metal putty knife. The thickness of the application coat ranges from 1.0 mm to 3.5 mm and depends on the granulometry of the product and the coarseness of the substrate. • For best results, the finishing of the surfaces must be carried out after plastering, without intermediate interruptions and without the use of wetting water. • Finishing is carried out with a hard plastic or styrofoam float. • The DÉCOR look is best achieved by small circular movements of the float. • The GRAFIATO look is best achieved by long circular movements of the float followed by longitudinal movements in the desired direction. • The exact processing time depends on the substrate and environmental conditions. • The application temperature should be between +5 oC and +35 oC. • For best results, before applying SILICONE PLASTER, the substrate should be prepared with the BIOPRIMER primer. • Especially in the case of shades, it is important to first apply BIOPRIMER in the same shade as that of SILICONE PLASTER.

Συσκευασία & Φύλαξη

• In containers of 25 kg and 5 kg on pallets. • In sealed containers and in a dry environment, protected from frost and prolonged exposure to strong sunlight for 12 months from the date of production.

Κατανάλωση

From 1.5 kg/m2 to 2.5 kg/m2, depending on the granulometry, the type of substrate and the required finish.

GRANULOMETRIES CONSUMPTION
DÉCOR 1.0 ~2.0 kg/m²
DÉCOR 1.3 ~2.5 kg/m²
GRAFIATO 1.6 ~2.5 kg/m²

 

Τεχνικά Χαρακτηριστικά

Specifications: EN 15824:2017 / EAD 040083-00-0404

Granule size Between 0.0mm and 2.4mm
Density 1.6-1.7 kg/l
Adhesion 1.55 MPa
Thermal conductivity λ10,dry 0.52 W/m∙K
Water absorption 0.1<w<0.5 kg/m2∙h0.5 (W2)
Capillary water absorption Cm<0.1 kg/m2. min0.5
Vapor permeability sd<0.14m (V1)

Although the specifications and guidelines set out in this bulletin have been prepared to the best of our skills, knowledge and experience, they should be taken as indicative and require verification after many applications.  Users to whom this product is addressed should verify its suitability for the intended application.  The end user is responsible for any result of the use of the product.